Filter
Top Products
4-24
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 4 CPE Management Overview
Configuring SNMP Trap for CPEs
For details on how to add these properties in the device property hierarchy, see Modifying Device
Records, page 16-11.
Step 2 Configure these properties to be available in /IPDevice/properties/available/pg.
Step 3 Perform a force synchronization of the device with the DPE to update the device configuration. For
details, see Forcing a Configuration Synchronization, page 16-17.
Step 4 Reboot the device and verify if the trap receiver receives the SNMP traps from the DPE.
The SNMP trap consists of the alarm property values. Table 4-4 describes the OIDs (Object Identifiers)
that are used in device MIB for these SNMP alarm property values.
/IPDevice/cpeAlarm/prefixEID True/False False If set to true, then EID will be prefixed
with ManagedObject Instance and
AlarmIdentifier.
/IPDevice/cpeAlarm/prefixEID Any Custom
Property
- If set, then the custom property will be
prefixed with the ManagedObject Instance
in the SNMP trap.
Table 4-3 Properties - SNMP Trap Facility (continued)
Property
Possible
values
Default
Values Description
Table 4-4 OID mapping
OID .FaultMgmt.ExpeditedEvent.{i}. .FaultMgmt.QueuedEvent.{i}.
cenAlarmInstanceID AlarmIdentifier AlarmIdentifier
cenAlarmTimestamp EventTime EventTime
cenAlarmManagedObject
Class
ManagedObjectInstance ManagedObjectInstance
cenAlarmDescription EventType EventType
cenUserMessage1 ProbableCause ProbableCause
cenUserMessage2 SpecificProblem SpecificProblem
cenAlarmSeverity/cenAlar
mSeverityDefinition
PerceivedSeverity PerceivedSeverity
cenUserMessage3 AdditionalText AdditionalText
cenUserMessage3 AdditionalInformation AdditionalInformation
cenAlarmStatusDefinition NotificationType NotificationType
cenAlarmType unknown(1), direct(2),
indirect(3), mixed(4)
unknown(1), direct(2), indirect(3),
mixed(4)
cenAlarmServerAddress DPE address DPE address