Cisco Systems OL-27172-01 Mobility Aid User Manual


 
11-6
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 11 Monitoring Cisco Broadband Access Center
Monitoring Servers by Using SNMP
SNMP Agent
The Cisco BAC SNMP agents support SNMP informs and traps, collectively called as notifications
hereafter. You can configure the SNMP agent on the DPE by using snmp-server CLI commands, and on
the RDU by using the snmpAgentCfgutil.sh tool.
See Using the snmpAgentCfgUtil.sh Tool, page 11-6, for additional information on the SNMP
configuration command line tool, and the Cisco Broadband Access Center 3.8 DPE CLI Reference, for
additional information on the DPE CLI.
MIB Support
Cisco BAC supports several different MIBs. These include:
CISCO-BACC-DPE-MIB
CISCO-BACC-RDU-MIB
CISCO-BACC-SERVER-MIB
Table 11-5 summarizes the MIB support in Cisco BAC:
The RDU SNMP agent supports the CISCO-BACC-RDU-MIB, which defines managed objects for the
RDU. This MIB defines statistics related to the state of the RDU and the statistics on the communication
interface between the RDU and DPE.
The DPE SNMP agent supports the CISCO-BACC-DPE-MIB, which defines managed objects for the
DPE. This MIB provides some basic DPE configuration and statistics information.
The SNMP agent supports the CISCO-BACC-SERVER-MIB. This MIB defines the managed objects
that are common to all servers on Cisco BAC. This MIB supports the monitoring of multiple Cisco BAC
servers when they are installed on the same device. The
ciscoBaccServerStateChanged notification is
generated every time a server state change occurs.
Note For a description of all objects, refer to the corresponding MIB files under the <BPR_HOME>/rdu/mibs
directory.
Using the snmpAgentCfgUtil.sh Tool
You can use the snmpAgentCfgUtil.sh tool to manage the SNMP agent.
By using this tool, which is located in the <BPR_HOME>/snmp/bin directory, you can add (or remove)
your host to a list of other hosts that receive SNMP notifications, and start and stop the SNMP agent
process.
Table 11-5 Cisco BAC-Supported MIBs
Installation Component MIBs Supported
DPE CISCO-BACC-SERVER-MIB
CISCO-BACC-DPE-MIB
RDU CISCO-BACC-SERVER-MIB
CISCO-BACC-RDU-MIB