Filter
Top Products
17-4
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 17 Configuring Broadband Access Center
Configuring the Class of Service
Note Changes to the Class of Service object trigger the Instruction Generation Service (IGS) to regenerate
instructions for all affected devices and send instructions to the DPEs. IGS does this task as a background
job. The status of the IGS can be observed using the View RDU Details page.
To add, delete, or modify Class of Service properties:
Step 1 Choose Configuration on the Primary Navigation bar.
Step 2 Choose Class of Service from the Secondary Navigation bar.
Step 3 Choose the Class of Service to be modified.
Step 4 Click the link corresponding to the correct Class of Service.
The Modify Class of Service page appears; note that the selected Class of Service name and type appear
below the page description.
• To add a new property to the selected Class of Service:
–
Select the first property that you want assigned to the selected Class of Service, from the
Property Name drop-down and then, after choosing the appropriate value for that property, click
Add.
–
Repeat for any other properties you want to assign to the selected Class of Service.
• To delete a property for the selected Class of Service:
–
Locate the unwanted property in the list immediately above the Property Name drop-down.
–
Click the Delete button.
• To modify the value currently assigned to a property:
–
Delete the appropriate property as described above.
–
Add the same property back to the Class of Service while entering the new Property Value.
Note If you delete a property that is required for your business process, you must add it back, and
select the appropriate value, before you submit the change.
Step 5 Click Submit to make the modifications to the class of service.
Each property added to a Class of Service, appears when you click Submit. After doing so, a
confirmation page appears to regenerate the instructions for the devices with the selected Class of
Service.
Step 6 Click OK.
The modified Class of Service will be available in the Manage Class of Service page.
Deleting a Class of Service
You can delete any existing Class of Service but, before you attempt to do so, you must ensure that there
are no devices associated with that Class of Service.