Filter
Top Products
17-9
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 17 Configuring Broadband Access Center
Configuring Defaults
STUN Enabled Check this box if you want the STUN server to be enabled for the device.
STUN Server Address Specifies the STUN server address.
STUN Server Port Specifies the STUN server port.
STUN HTTP Server Port Specifies the STUN server HTTP port.
STUN HTTP Server
User Name
Specifies the STUN server HTTP user name.
STUN HTTP Server
Password
Specifies the STUN server HTTP password
SOAP Request Sender
Extension
Specifies the script to be executed when the CPE sends a request to the DPE
SOAP Response Sender
Extension
Specifies the script to be executed when the DPE sends a response to the
CPE.
Incoming Event Viewer
Extension
Specifies the script to be executed when the DPE receives an event of
existing configuration from the CPE.
Outgoing Event Viewer
Extension
Specifies the script to be executed when the DPE sends an event of required
configuration to the CPE.
SOAP Request Sender
Extension for Unknown
Devices
Specifies the script to be executed when the unknown device sends a request
to the DPE.
Soap Response Sender
Extension for Unknown
Devices
Specifies the script to be executed when the DPE sends response to the
unknown device.
Submit Activates or implements the changes you have made.
Reset Returns all settings to their previous settings.
Table 17-3 Configure CWMP Defaults Page (continued)
Field or Button Description