Filter
Top Products
16-18
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 16 Using the Administrator User Interface
Group Management
Setting Device Operations Timeout
You can set the duration within which an operation is to be executed on device. After that period, the
operation times out.
Note In addition to the procedure described in this section, you can set the default timeout duration in the
Device Operation Timeout field using Configuration > Defaults > CWMP Defaults.
To set the timeout value for a device operation:
Step 1 From the Devices > Manage Devices page, locate the correct device.
Step 2 Click the Operations icon corresponding to the device.
The Device Operations page appears.
Step 3 From the drop-down list under Device Operation, select the operation you want to perform.
Step 4 Enter a value (in seconds) in the Device Operation Timeout field. The default value for a device
operation to time out is 90 seconds.
Step 5 Click Submit.
Group Management
Group management allows the creation, modification, and deletion of groups and group types.
Note Group priorities in the property hierarchy (see Property Hierarchy, page 4-4) are handled through group
types.
Managing Group Types
Access the Manage Groups page (shown in Figure 16-4) by selecting Groups from either the main menu
or the primary menu bar. Group Type is the default setting when this page appears.