Filter
Top Products
16-21
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 16 Using the Administrator User Interface
Group Management
Figure 16-6 Add Group Page
Step 3
Enter the name for the new group.
Group name can contain alphanumeric characters and other characters such as, underscore (_), hyphen
(-) , period (.), colon (:), and at sign (@) characters. The group name is validated against these characters.
If the group name contains characters other than these, Add Group operation fails.
Step 4 Select the appropriate Group Type from the drop-down list.
Step 5 In addition to the above fields, you can optionally add new values for existing property name/value pairs.
–
Property Name - Identifies the name of the custom or built-in device property.
–
Property Value - Identifies the value of the property.
To add the property, click Add
Step 6 Click Submit to add the device, or Reset to clear all fields.
Modifying a Group
To modify group properties:
Step 1 Select Group from the drop-down list on the Manage Groups page.
Step 2 Select the group that needs to be modified from the group list.
The Modify Group page appears.
Step 3 Make the necessary changes and Click Submit.
The Manage Group page appears with the appropriately modified description.
Deleting Groups
You can delete any group that appears in the Manage Groups page by checking the box corresponding
to the correct group and clicking the Delete button.