Filter
Top Products
17-3
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 17 Configuring Broadband Access Center
Configuring the Class of Service
Adding a Class of Service
To add a specific Class of Service:
Step 1 Choose Configuration on the Primary Navigation bar.
Step 2 Choose Class of Service from the Secondary Navigation bar.
Step 3 Click Add.
The Add Class of Service page appears. This page identifies the various settings for the selected Class
of Service.
Step 4 Enter the name of your new class of service.
For example, assume that you want to create a new Class of Service called Gold-Classic for CWMP. You
might enter provisioned-cwmp as the Class of Service Name, and choose CWMP from the service type
drop-down list.
Step 5 Choose a Configuration Template File. For example, choose sample-cwmp-config.xml from the
configuration file template drop-down list.
Step 6 Choose also a Firmware Rule File. For example, choose sample-cwmp-firmware-rules.xml from the
firmware rule file drop-down list.
Step 7 Enter a Property Name and Property Value in the appropriate fields. This lets you configure standard or
custom properties for this class of service object.
For example, choose as property name /IPDevice/connectionRequestMethod. Choose Discovered from
the Property Value drop-down list and then continue with the rest of this procedure.
Note The API constant for /IPDevice/connectionRequestMethod is
IPDeviceKeys.CONNECTION_REQUEST_METHOD.
Multiple Property Name:Property Value pairs could appear on this page. You use the Delete
button to remove any unwanted pairs from the class of service.
Step 8 Click Add to add the property to the defining Class of Service.
Step 9 Click Submit to finalize the process or Reset to return all fields to their previous setting.
After submitting the Class of Service, the Manage Class of Service page appears to show the newly
added Class of Service.
Modifying a Class of Service
You can modify the Classes of Service by selecting the various properties and assigning appropriate
property values. When creating a Class of Service for the first time you select all of the appropriate
properties and assign values to them.
If you make a mistake, or your business requirements for a certain Class of Service change, you can
either change the property value before submitting your previous changes or delete the Property
Name:Property Value pair altogether.