Filter
Top Products
15-2
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 15 Understanding the Administrator User Interface
Accessing the Administrator User Interface
• /adminui/maxReturned—Specifies the maximum number of search results. This number is, by
default, 1000.
• /adminui/pageSize—Specifies the number of search results displayed per page. You can set this
number at 25, 50, or 75. The default value is 25.
• /adminui/refresh—Specifies if the refresh function is enabled or disabled. This option is, by default,
disabled.
• /adminui/extensions—Specifies if the use of extensions in Cisco BAC is enabled or disabled. You
use extensions to augment Cisco BAC behavior or add support for new device technologies. The use
of extensions is, by default, enabled.
• /adminui/maxFileSize—Specifies the maximum size of a file uploaded to Cisco BAC. This file size
is, by default, 10 MB.
• /adminui/refreshRate—Specifies the duration (in seconds) after which a screen is refreshed. This
value is, by default, 90 seconds. Before setting a value for this option, ensure that the
/adminu/refresh option is enabled.
• /adminui/timeout—Specifies the duration (in minutes) after which an idle session is timed out. This
period is, by default, set as 300 minutes.
• /adminui/noOfLines—Specifies the last number of lines from the rdu.log or the dpe.log that will be
displayed on the user interface. The number of lines that appear, by default, is 250.
• /adminui/noOfFiles—Specifies the number of troubleshooting log files that you can view. The
number of files you can view is, by default, 1. The maximum number of files that you can view at a
given time is 5.
Example 15-1 Sample adminui.properties File
/adminui/port=49187
/adminui/fqdn=doc.cisco.com
/adminui/maxReturned=1000
/adminui/pageSize=25
/adminui/refresh=disabled
/adminui/extensions=enabled
/adminui/maxFileSize=10000000
/adminui/refreshRate=90
/adminui/timeout=300
/adminui/noOfLines=250
/adminui/noOfFiles=1
Accessing the Administrator User Interface
You can access the administrator user interface from any computer that can access the URL
corresponding to the Cisco BAC application.
Logging In
You can log into the user interface as an Administrative user, a Read/Write user, or a Read-Only user.
Although each user type has different capabilities, as described in User Management, page 16-1, you
access the user interface in the same way.