Filter
Top Products
16-10
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 16 Using the Administrator User Interface
Device Management
Managing Devices
The Devices menu lets you add devices to the RDU databases and update preprovisioned data. Device
management includes:
• Adding, deleting, and modifying RDU device records
• Regenerating instructions
• Relating selected devices to management objects, such as Provisioning Group, Class of Service,
Group, and so on.
• Executing operations on devices. These operations are actually performed on the device and include:
–
Reboot
Discovered Parameters
Note
This section includes any parameters discovered from the device. This section does not appear
unless discovered parameters are available for the device. For details on how to configure
discovered parameters, see Discovering CPE Parameters, page 4-4.
Has Routable IP Address Identifies if a device is generally reachable; that is, if the
source IP address of the last request was the same as the WAN
IP address reported by the CPE in the Inform message.
Inform.DeviceId.Manufacturer Identifies the manufacturer of the CPE reported in the last
Inform message.
Inform.DeviceId.ManufacturerOUI Identifies the unique identifier of the manufacturer of the CPE
reported in the last Inform message.
Inform.DeviceId.ProductClass Identifier a manufacturer’s product or class of product over
which the SerialNumber parameter is unique. The device
reports this parameter in the Inform message.
InternetGatewayDevice.DeviceInfo.
HardwareVersion
Identifies the hardware version of the CPE.
InternetGatewayDevice.DeviceInfo.
ModelName
Identifies the model name of the CPE.
InternetGatewayDevice.DeviceInfo.
SoftwareVersion
Identifies the software version currently installed on the CPE.
The software version is also known as firmware version.
InternetGatewayDevice.
ManagementServer.ParameterKey
Specifies the value of the ParameterKey reported by the device
in the last Inform message or last set by the DPE, whichever
occurred last.
Faulty Device List
Note
This information is displayed only if faults occur at the devices. For more information, see
Device Faults, page 8-6.
Last Fault Time Specifies the date and time that a recurring fault occurred for
this device.
Location Specifies the server on which this fault occurred.
Fault Description Provides a description of the recurring fault.
Table 16-2 Device Details Page (continued)
Field or Button Description