Filter
Top Products
21-7
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 21 Troubleshooting Broadband Access Center
Logging
Step 3 Enter the RDU username at the prompt. In this example, the default username (bacadmin) is used.
Please type RDU username: bacadmin
This prompt appears:
Please type RDU password:
Step 4 Enter the RDU password for the RDU at the prompt. In this example, the default password (changeme)
is used.
Please type RDU password: changeme
This message appears to notify you that the log level has been changed. In this example, the level was
5, for notification, and is now 4, for warning.
RDU Log level was changed from 5 (notification) to 4 (warning).
Viewing the RDU’s Current Log Level
You can use this tool to view the RDU log and determine which logging level is configured before
attempting to change the value.
To view the RDU’s current logging level:
Step 1 Change directory to BPR_HOME/rdu/bin.
Step 2 Run this command:
setLogLevel.sh -show
This prompt appears:
Please type RDU username:
Step 3 Enter the RDU username (bacadmin) and press Enter.
Please type RDU username: bacadmin
This prompt appears:
Please type RDU password:
Step 4 Enter the RDU password (changeme) and press Enter.
Please type RDU password: changeme
This message appears:
The logging is currently set at level: 4 (warning)
All tracing is currently disabled.