Filter
Top Products
17-10
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 17 Configuring Broadband Access Center
Configuring Defaults
RDU Defaults
When you click the RDU defaults link, the RDU Defaults page (see Figure 17-3) appears. Use this page
to configure settings affecting RDU operations.
Figure 17-3 Configure RDU Defaults Page
Table 17-4 describes all fields and buttons appearing in Figure 17-3.
Note See Managing RDU Extensions, page 17-23, for related information on RDU extension points.
Table 17-4 Configure RDU Defaults Page
Field or Button Description
Configuration Extension
Point
Identifies the configuration extension executed before any other technology
extension is executed.
Device Detection
Extension Point
Identifies the extension used to determine a device’s type.
Publishing Extension
Point
Identifies the extension to be used for an RDU publishing plug-in.This is
useful when you need to publish RDU data to another database.
Extension Point Jar File
Search Order
Specifies the sequence in which the classes are searched in the Jar files that
are listed in the preceding four fields.
Allow Unknown CPE Check this option if you wish to enable devices, that need to be provisioned
but are not yet added to the RDU.
Submit Activates or implements the changes you have made.
Reset Returns all settings to their previous settings.