Filter
Top Products
17-13
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 17 Configuring Broadband Access Center
Configuring Defaults
TACACS+ Defaults
When you click the TACACS+ Defaults link, the TACACS+ Defaults page appears.
Figure 17-5 TACACS+ Defaults Page
Table 17-6 describes all fields and buttons appearing in Figure 17-5.
Table 17-6 Configure TACACS+ Defaults Page
Field or Button Description
TACACS+ Authentication Allows you to enable or disable TACACS+
Authentication. TACACS+ Authentication is
disabled by default.
TACACS+ Client Read/Write timeout Specifies the duration that the TACACS+ client
waits for a TACACS+ server to reply to
TACACS+ protocol requests.
The range is from 1 to 300 seconds. The default is
5 seconds and applies to all TACACS+ servers
TACACS+ Client Maximum retries Specifies the number of times the TACACS+
client attempts a valid TACACS+ protocol
exchange with a TACACS+ server if it fails to
respond to the initial request.
The range is from 0 to 10. The default is 1 and
applies to all TACACS+ server defined