Filter
Top Products
4-22
Cisco Broadband Access Center 3.8 Administrator Guide
OL-27172-01
Chapter 4 CPE Management Overview
Configuring SNMP Trap for CPEs
The following components are configured in Cisco BAC for SNMP Trap facility:
• RDU, see Configuration at RDU Level, page 4-22
• DPE and Trap Receiver, see Configuration at DPE Level, page 4-22
• Device, see Configuration at Device Level, page 4-23
Configuration at RDU Level
To configure RDU for SNMP trap facility:
Step 1 Create or update the BAC configuration template to support expedited and queued alarms.
The following parameters must be set in the configuration template:
• For expedited alarms:
–
FAPService.{i}.FaultMgmt.SupportedAlarm.{i}.ReportingMechanism=0 {Expedited}
–
FAPService.{i}.FaultMgmt.ExpeditedEvent=Active
• For Queued alarms
–
FAPService.{i}.FaultMgmt.SupportedAlarm.{i}.ReportingMechanism=1 {Queued}
–
FAPService.{i}.FaultMgmt.QueuedEvent=Active
For information on how to author configuration template, see Authoring Configuration Templates,
page 5-14.
Step 2 Add this configuration template to the RDU database:
a. Log into the Cisco BAC admin UI.
b. Choose Configuration on the primary navigation bar.
c. Choose Files on the secondary navigation bar. The View Files page appears.
d. Click Add.
The Add Files page appears.
e. Choose Configuration Template from the File Type drop-down list.
f. Browse for the Source File Name.
g. Add the configuration template name in the File Name field.
h. Click Submit.
Step 3 Associate this configuration template with the required Class of Service. For details, see Configuring the
Class of Service, page 17-1.
Configuration at DPE Level
To configure DPE for SNMP trap facility:
Step 1 Configure the SNMP alarm property values in the DPE. The following alarm property values must be
configured in the DPE to support SNMP trap:
• AlarmIdentifier
• AlarmRaisedTime
• AlarmChangedTime