Filter
Top Products
Getting Started Teledyne API M100E Analyzer Operation Manual
34
CAUTION
GENERAL SAFETY HAZARD
Sample and calibration gases should only come into contact with PTFE (Teflon) or glass
tubes and fixtures.
They SHOULD NOT come in contact with brass or stainless steel fittings prior to the
reaction cell.
The exhaust from the analyzer’s internal pump MUST be vented outside the immediate
area or shelter surrounding the instrument.
It is important to conform to all safety requirements regarding exposure to SO
2
.
VENT
Figure 3-8: Pneumatic Connections–Basic Configuration–Using Bottled Span Gas
04515F DCN6048