Filter
Top Products
Teledyne API M100E Analyzer Operation Manual Introduction
17
Additional documentation for the M100E SO
2
Analyzer is available from Teledyne API’s website at
http://www.teledyne-api.com/manuals/
.
APICOM software manual, part number 03945.
Multidrop manual, part number 01842.
iDAS Manual, part number 02837.
1.3.1. USING THIS MANUAL
NOTE
Throughout this manual, words printed in capital, bold letters, such as SETUP or ENTR represent
messages as they appear on the analyzer’s display.
This manual has the following structure:
TABLE OF CONTENTS
Outlines the contents of the manual in the order the information are presented. This is a good overview of the
topics covered in the manual. There is also a list of appendices, figures and tables.
SECTION I – GENERAL INFORMATION
INTRODUCTION
A brief description of the M100E analyzer architecture as well as a description of the layout of the manual
and what information is located in its various sections and chapters.
SPECIFICATIONS AND WARRANTY
A list of the analyzer’s performance specifications and if applicable a description of the conditions and
configuration under which EPA equivalency was approved as well as the Teledyne API’s warranty
statement.
GETTING STARTED
Instructions for setting up, installing and running your analyzer for the first time.
GLOSSARY
Answers to the most frequently asked questions about operating the analyzer and a glossary of acronyms
and technical terms.
OPTIONAL HARDWARE & SOFTWARE
A description of optional equipment to add functionality to your analyzer.
04515F DCN6048