Filter
Top Products
15
1. INTRODUCTION
1.1. SAFETY MESSAGES
Your safety and the safety of others are very important. We have provided many important safety messages in
this manual. Please read these messages carefully.
A safety message alerts you to potential hazards that could hurt you or others. Each safety message is
associated with a safety alert symbol. These symbols are found in the manual and inside the instrument. The
definition of these symbols is described below:
General Safety Hazard: Refer to the instructions for details on the specific hazard.
CAUTION: Hot Surface Hazard.
CAUTION: Electrical Shock Hazard.
TECHNICIAN SYMBOL: All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
CAUTION
General Safety Hazard
The M100E Analyzer should only be used for the purpose and in the manner
described in this manual. If you use the M100E in a manner other than that for
which it was intended, unpredictable behavior could ensue with possible
hazardous consequences.
Technical Assistance regarding the use and maintenance of the
M100E or any other Teledyne API product
can be obtained by contacting Teledyne API’s Customer Service Department by:
Phone at 800-324-5190
Sending an email to api-customerservice@teledyne.com
or
Accessing various service options on our website at http://www.teledyne-api.com/.
04515F DCN6048