Teledyne API M100E Analyzer Operation Manual Specifications, Approvals and Warranty
21
2.3. CE MARK COMPLIANCE
2.3.1. EMISSIONS COMPLIANCE
The Teledyne-Advanced Pollution Instrumentation UV Fluorescence SO
2
Analyzer M100E was tested and found
to be fully compliant with:
EN61326 (1997 w/A1: 98) Class A, FCC Part 15 Subpart B Section 15.107 Class A, ICES-003 Class A (ANSI
C63.4 1992) & AS/NZS 3548 (w/A1 & A2; 97) Class A.
Tested on 21 February 2003 - 08 March 2003 at CKC Laboratories, Inc., Report Number CE03-021A.
2.3.2. SAFETY COMPLIANCE
The Teledyne-Advanced Pollution Instrumentation UV Fluorescence SO
2
Analyzer M100E was tested and found
to be fully compliant with:
IEC 61010-1:90 + A1:92 + A2:95,
Issued by CKC Laboratories on 4 April 2003, Report Number WO-80146.
2.4. WARRANTY
WARRANTY POLICY (02024D)
Prior to shipment, Teledyne API equipment is thoroughly inspected and tested. Should equipment failure occur,
Teledyne API assures its customers that prompt service and support will be available.
COVERAGE
After the warranty period and throughout the equipment lifetime, Teledyne API stands ready to provide on-site or
in-plant service at reasonable rates similar to those of other manufacturers in the industry. All maintenance and
the first level of field troubleshooting are to be performed by the customer.
NON-API MANUFACTURED EQUIPMENT
Equipment provided but not manufactured by Teledyne API is warranted and will be repaired to the extent and
according to the current terms and conditions of the respective equipment manufacturer’s warranty.
GENERAL
During the warranty period, Teledyne API warrants each Product manufactured by Teledyne API to be free from
defects in material and workmanship under normal use and service. Expendable parts are excluded.
If a Product fails to conform to its specifications within the warranty period, Teledyne API shall correct such
defect by, at Teledyne API's discretion, repairing or replacing such defective Product or refunding the purchase
price of such Product.
The warranties set forth in this section shall be of no force or effect with respect to any Product: (i) that has been
altered or subjected to misuse, negligence or accident, or (ii) that has been used in any manner other than in
accordance with the instruction provided by Teledyne API, or (iii) not properly maintained.
04515F DCN6048