Filter
Top Products
Model GFC7000E Instruction Manual Getting Started
04584 Rev A1 10
5. Check the connectors of the various internal wiring harnesses and pneumatic hoses to make
sure they are firmly and properly seated.
6. Verify that all of the optional hardware ordered with the unit has been installed. These are
listed on the paperwork accompanying the analyzer.
7. Once you have determined that no shipping damage exists, and the unit includes all expected
hardware options, remove all red colored shipping screws from the bottom of the chassis as
shown in Figure 3-1.
Shipping
Screws
Figure 3-1: Removal of Shipping Screws
NOTE
Save these shipping screws and re-install them whenever the unit is shipped to another
location.