Filter
Top Products
Model GFC7000E Instruction Manual Specifications, Approvals and Warranty
04584 Rev A1 6
2.2. CE Mark Compliance
Emissions Compliance
The Teledyne Instruments Model GFC7000E Gas Filter Correlation CO
2
Analyzer was tested and
found to be fully compliant with:
EN61326 (1997 w/A1: 98) Class A, FCC Part 15 Subpart B Section 15.107 Class A, ICES-003
Class A (ANSI C63.4 1992) & AS/NZS 3548 (w/A1 & A2; 97) Class A.
Tested on 11-29-2001 at CKC Laboratories, Inc., Report Number CE01-249.
Safety Compliance
The Teledyne Instruments Model GFC7000E Gas Filter Correlation CO
2
Analyzer was tested and
found to be fully compliant with:
IEC 61010-1:90 + A1:92 + A2:95,
Tested on 02-06-2002 at Nemko, Report Number 2002-012219.
2.3. Warranty
Warranty Policy (02024)
Prior to shipment, Teledyne Instruments Incorporated equipment is thoroughly inspected and
tested. Should equipment failure occur, Teledyne Instruments Incorporated assures its customers
that prompt service and support will be available.
Coverage
After the warranty period and throughout the equipment lifetime, Teledyne Instruments
Incorporated stands ready to provide on-site or in-plant service at reasonable rates similar to
those of other manufacturers in the industry. All maintenance and the first level of field
troubleshooting is to be performed by the customer.
Non-API Manufactured Equipment
Equipment provided but not manufactured by Teledyne Instruments Incorporated is warranted
and will be repaired to the extent and according to the current terms and conditions of the
respective equipment manufacturers warranty.
General
Teledyne Instruments Incorporated warrants each product manufactured by Teledyne Instruments
Incorporated to be free from defects in material and workmanship under normal use and service
for a period of one year from the date of delivery. All replacement parts and repairs are warranted
for 90 days after the purchase.
If a product fails to conform to its specifications within the warranty period, Teledyne Instruments
Incorporated shall correct such defect by, in Teledyne Instruments Incorporated’s discretion,
repairing or replacing such defective product or refunding the purchase price of such product.