Filter
Top Products
Model GFC7000E Instruction Manual Operating Instructions
04584 Rev A1 93
STEP 2: Configure the INSTRUMENT IP, GATEWAY IP and SUBNET MASK addresses by
pressing:
Internet Configuration Keypad Functions
KEY FUNCTION
[0]
Press this key to cycle through the range of
numerals and available characters (“0 – 9” & “ . ”)
<CH CH>
Moves the cursor one character left or right.
DEL
Deletes a character at the cursor location.
ENTR
Accepts the new setting and returns to the previous
menu.
EXIT
Ignores the new setting and returns to the previous
menu.
Some keys only appear as needed.
SETUP X.X
DHCP: OFF
SET>
EDIT
EXIT
SETUP X.X
INST IP: 000.000.000.000
<SET SET> EDIT
EXIT
SETUP X.X
GATEWAY IP: 000.000.000.000
<SET SET> EDIT
EXIT
SETUP X.X INST IP: [0] 00.000.000
<CH CH> DEL [0]
ENTR EXIT
SETUP X.X
SUBNET MASK:255.255.255.0
<SET SET> EDIT
EXIT
SETUP X.X
SUBNET MASK:[2]55.255.255.0
<CH CH> DEL [?]
ENTR EXIT
SETUP X.X
TCP PORT 3000
<SET
EDIT
EXIT
The PORT number needs to remain at 3000.
Do not change this setting unless instructed to by
Teledyne Instruments Customer Service personnel.
From Step 1 above)
SETUP X.X
GATEWAY IP: [0] 00.000.000
<CH CH> DEL [?]
ENTR EXIT
Cursor
location is
indicated by
brackets
SETUP X.X
INITIALIZING INET 0%
…
INITIALIZING INET 100%
SETUP X.X
INITIALIZATI0N SUCCEEDED
SETUP X.X
INITIALIZATION FAILED
SETUP X.X
COMMUNICATIONS MENU
ID
INET
COM1 EXIT
Pressing EXIT from
any of the above
display menus
causes the Ethernet
option to reinitialize
its internal interface
firmware
Contact your IT
Network Administrator