Mitsubishi Electronics MR-J3-B Wheelchair User Manual


 
Print Data *Manual Number Revision
Jun, 2008 SH(NA)030051-D
Section 11.2 (4)
Section 11.2 (5) (a)
Section 11.3.3 (4) (a)
Section 11.3.4 (2)
Section 11.5 (4) (a) 1)
Section 11.5 (4) (b) 1)
Section 11.5 (4) (b) 2)
Section 11.6 (3) (a)
Section 11.6 (3) (b)
Section 11.8 (2) (a)
Section 11.11
Section 11.11 (1)
Section 11.12
Section 11.13
Section 11.17 (2) (b)
Chapter 12
Section 13.1.5
Section 13.3
Section 13.3.7 (1) (b)
Section 13.3.7 (3) (a) 1) to
3)
Section 13.7.1
Section 13.7.2
Section 13.8.3
Section 13.9.1 (2)
Section 13.9.3 (2)
Section 13.9.4
Section 13.9.4 (1)
Section 13.9.5
Section 13.9.9 (2)
Section 13.9.10 (4) (b)
Appendix 4
Appendix 5
: Change of description
: Change of tightening torque size from “3.2” to “3.24”
: Change of description
: Correction of C dimension
: Addition of POINT for selection condition of wire sizes,
Deletion of “The used wires are based on the 600V
vinyl wires.” from the sentence
: Change of wiring length of servo amplifier (3.5kW) in
connection diagram from “5.5mm
2
” to “3.5mm
2
: Change of wiring length between the servo amplifier
(2kW) and the one (15kW) in connecting diagram
: Addition of Note to Table
: Addition of Note to Table
: Table content change, Change of
position for
Windows Vista, Deletion of RS-422/232C conversion
cable
: Change of description for “Recommended wires” to
“Wires selection example”, Addition of three POINTs
: Deletion of body paragraph, Change of description for
IV wires selection example, Addition of HIV wires
selection example, Change of crimping terminal
selection example
: Change of Table
: Addition of table for dynamic brake wire size
: Deletion of AC electromagnetic brake from body
paragraph
: Change of description for Note, Addition of POINT
: Partial deletion of body paragraph
: Change of description for Note
: Change of timing chart
: Addition of Note
: Change of pound notation for mass to three significant
digits
: Change of pound notation for mass to three significant
digits
: Change of description form, Change of dynamic brake
of HA-LP2000r/min series characteristics, Change of
body paragraph
: Change of Note
: Addition of Note to Table
: Change of description for "Recommended wires” to
“Wires selection examples”, Addition of three POINTs
: Deletion of body paragraph, Change of description for
IV wires selection example, Addition of HIV wires
selection example, Change of crimping terminal
selection example
: Deletion of Note
: Deletion of surge protectors from wiring diagram
: Correction of C dimension
: Change of body paragraph
: New addition for explanation of servo amplifier MR-J3-
200B-RT