Filter
Top Products
13 - 55
13. SERVO AMPLIFIERS WITH A LARGE CAPACITY (30k TO 55kW)
13.5. Parameters for converter unit
CAUTION
Never adjust or change the parameter values extremely as it will make operation
instable.
POINT
Refer to chapter 5 for parameters for drive unit.
Parameter whose symbol is preceded by * is made valid with the following
conditions.
* : Set the parameter value, switch power off once after setting, and then
switch it on again, or perform the controller reset.
Never change parameters for manufacturer setting.
13.5.1 Parameter list
No. Symbol Name Initial value Unit
PA01 *REG Regenerative option 0000h
PA02 *MCC Magnetic contactor drive output selection 0001h
PA03 For manufacturer setting 0001h
PA04 0
PA05 100
PA06 0
PA07
100
PA08 *DMD Status display selection 0000h
PA09 *BPS Alarm history clear 0000h
PA10 For manufacturer setting 0
PA11
0000h
PA12 *DIF Input filter setting 0002h
PA13 For manufacturer setting 0000h
PA14 0000h
PA15 0000h
PA16 0000h
PA17 0000h
PA18 0000h
PA19
0000h