Filter
Top Products
Configuration and Use Manual 1
Startup ConfigurationCalibrationBefore You Begin
Chapter 1
Before You Begin
1.1 Overview
This chapter provides an orientation to the use of this manual, and includes a configuration overview
flowchart and a pre-configuration worksheet. This manual describes the procedures required to start,
configure, use, maintain, and troubleshoot Micro Motion
®
Model 2700 transmitters with
PROFIBUS-PA.
1.2 Safety
Safety messages are provided throughout this manual to protect personnel and equipment. Read each
safety message carefully before proceeding to the next step.
1.3 Determining transmitter information
Transmitter options are indicated by the model number located on the transmitter tag. The model
number is a string of the following form:
2700 * 1 * G * * * * * *
Mounting code:
• R = 4-wire remote mount
• I = Integral mount
• B = 4-wire remote mount to 9-wire remote core processor
• C = 9-wire remote mount
Display code
• 1 = Display with glass lens
• 2 = Backlit display with glass lens
• 3 = No display
• 5 = Backlit display with IIC approval, glass lens
• 7 = Backlit display with non-glass lens
Output option code
• G = PROFIBUS-PA
Software code 1:
G = Concentration measurement application
A = Petroleum measurement (API) application
Software code 2:
C = Smart Meter Verification