Filter
Top Products
78 Model 2700 Transmitter with PROFIBUS-PA
Configuration
4.16.6 Changing the display variables and precision
The display can scroll through up to 15 process variables in any order. You can select the process
variables you wish to see and the order in which they should appear.
Additionally, you can configure display precision for each display variable. Display precision controls
the number of digits to the right of the decimal place. The range of the display precision is 0 to 5.
Table 4-17 shows an example of a display variable configuration. Notice that you can repeat variables
and you can choose a value of “None.” The actual appearance of each process variable on the display
is described in Appendix B.
To change the display variables, refer to the flowcharts in Figure 4-20.
Table 4-17 Example of a display variable configuration
Display variable Process variable
Display variable 1 Mass flow
Display variable 2 Volume flow
Display variable 3 Density
Display variable 4 Mass flow
Display variable 5 Volume flow
Display variable 6 Mass totalizer
Display variable 7 Mass flow
Display variable 8 Temperature
Display variable 9 Volume flow
Display variable 10 Volume totalizer
Display variable 11 Density
Display variable 12 Temperature
Display variable 13 None
Display variable 14 None
Display variable 15 None