Filter
Top Products
Configuration and Use Manual 177
Model 2700 PROFIBUS Block Parameters
Status Bytes Block ParametersDiagnostic BytesProLink
F.4.5 Transducer block 2 (device information, API, CM) views
Table F-10 shows the views for transducer block 2.
F.4.6 I & M functions
Table F-11 shows the parameters for I & M functions.
Table F-10 Transducer block 2 views
OD
Index
Parameter Mnemonic View 1 View 2 View 3 View 4
Standard Parameters
0 BLOCK_OBJECT
1ST_REV 2
2TAG_DESC
3STRATEGY
4 ALERT_KEY
5TARGET_MODE
6 MODE_BLK 3
7 ALARM_SUM 8
Overall sum of bytes in View Object 13
OD
Index
Parameter Mnemonic View 1 View 2 View 3 View 4
Standard Parameters
98 Overall sum of bytes in View Object
(+ 13 Standard parameters bytes)
13
Table F-11 I & M parameters
Index Sub-Index Parameter Mnemonic Definition Message Type Data Type/
Structure
Size Store/
Rate
(HZ)
Default
Value
Access Enu
mera
ted
List
of
Valu
es
Modbus
Register / Coil
255 65000 IM_DEFAULT I&M0(Mandatory) VARIABLE Octet String 64 S --- R -- --
HEADER –Reserved STRING Octet String 10 S 0x00 R --- Hard coded
MANUFACTURER_ID –
Identification code of the
Manufacturer of the PA
Device
VARIABLE Unsigned16 2 S
0x00
R --- Physical Block
Index 26
DEVICE_MAN
_ID
ORDER_ID –Order No. of
the Device
STRING Visible String 20 S 2700S
Profibus
PA
R --- R 2545 – 2554
SERIAL_NO –Production
Serial No. of the device
STRING Visible String 16 S ---- R --- Physical Block
Index 28 –
DEVICE_SER
_NUM
HARDWARE_REVISION
–Revision No. of the
Hardware
VARIABLE Unsigned 16 2 S 0xFFFF R --- 0xFFFF
SOFTWARE_REVISION
–Software or Firmware
revision of the device or
module
VARIABLE 1Char
3 Unsigned8
4 S --- R -- V 0xFF 0xFF
0xFF
REV_COUNTER –
According to /I&M/. The
REV_COUNTER is
incremented if a parameter
content with
static attribute in the
according slot has
Changed.
Slot 0 carries a
REV_COUNTER that
counts all changes of static
parameters of
The whole device.
VARIABLE Unsigned16 2 S 0 R --- Sum of
ST_REV of all
Blocks i.e. TB1
+
TB2+AI1+AI2+
AI3+AI4+TOT1
+TOT2+TOT3
+TOT4 +
AO1+AO2