Filter
Top Products
8XC196MC, MD, MH USER’S MANUAL
C-30
Px_DIR
P
x
_DIR
x
= 2, 5 (8XC196MC)
x
= 2, 5, 7 (8XC196MD)
x
= 1, 2, 5 (8XC196MH)
Address:
Reset State:
Tabl e C-6
Each pin of port
x
can operate in any of the standard I/O modes of operation: complementary output,
open-drain output, or high-impedance input. The port
x
I/O direction (P
x
_DIR) register determines the
I/O direction for each port
x
pin. The register settings for an open-drain output or a high-impedance
input are identical. An open-drain output configuration requires an external pull-up. A high-impedance
input configuration requires that the corresponding bit in P
x
_REG be set.
7 0
x
= 1 (MH) ————PIN3 PIN2 PIN1 PIN0
7 0
x
= 2, 5 (M
x
) PIN7 PIN6 PIN5 PIN4 PIN3 PIN2 PIN1 PIN0
7 0
x
= 7 (MD) PIN7 PIN6 PIN5 PIN4 PIN3 PIN2 PIN1 PIN0
Bit
Number
Bit
Mnemonic
Function
7:0
†
PIN7:0 Port
x
Pin
y
Direction
This bit selects the P
x
.
y
direction:
0 = complementary output (output only)
1 = input or open-drain output (input, output, or bidirectional open-
drain outputs require external pull-ups.
†
The bits shown as dashes (—) are reserved; for compatibility with future devices, write ones to these
bits.
Table C-6. P
x
_DIR Addresses and Reset Values
Register Address Reset Value
P1_DIR (8XC196MH) 1F9BH FFH
P2_DIR (8XC196M
x
)1FD2H FFH
P5_DIR (8XC196M
x
)1FF3H FFH
P7_DIR (8XC196MD) 1FD3H FFH