Filter
Top Products
Documenting Events 23 Event Surveillance
253
Event Episode Recordings
3 The third section shows the most important vital signs information, including numerics, active
alarms, and any annotations made on the event episode.
4 The fourth section shows the numerics for all the currently monitored vital signs and any alarm
conditions or INOPs active at the time the event was triggered.
Event Reports
Event reports can be printed on A4 and letter size paper on a printer connected locally or centrally to
your monitor.
In tabular event
review recordings,
the events stored in
the event database
are shown in
chronological order,
with a number and
time-stamp.
The measurements in the event group are shown in the next columns, marked “Parameter 1, Parameter
2...”, along with the event values measured at the time of the event. For each event, the trigger values are
shown.
This section of the recording is A4 or letter size, so that it fits in a patient file.
# Time Group Parameter 1 Parameter
2
Parmeter 3
1 23 Jan 02
07:56
Neuro Resp BIS LOW
51<60
ABP
2 23 Jan 02
07:59
Stand
ard
HR(Pulse)
TACHY 201>180
ST-II SpO2
3 23 Jan 02
08 02
Neuro Resp HIGH
76 60
BIS
ABP
Event episode recordings are divided into four sections.
1 The first section shows the patient information and the event
group of the episode with the event values for the group
measurements. The trigger symbol marks the event trigger.
2 The second section shows the waveforms recorded during the
episode. The trigger moment is marked with a triangle and
divides the episode into the pre/post time. Any calibration marks
and grid marks on the screen are automatically printed on the
recording.
If there are four measurements in the event group being recorded, two waveforms will be recorded in
two separate waveforms segments.
91MIN
Green, Sarah
37549201
23 Jan 02 10:43
ICU 3
Standard:HR(Pulse)
1.
HR 130
bpm
SPO2 98%
RR 80 rpm
No
interventi
on req.
**TACHY
**Resp
HIGH
**TACHY
**Resp
HIGH
HR 130 bpm
Pulse 130
bpm
6.25
-5
+10
II
Plet
Res
2.
3.
4
.