Filter
Top Products
12 - 12
12. MONITOR NUMBER
12.5 System information
Monitor No. Content Units Remarks
0400 Reserved
0401 Cause of forced stop (Note)
bit 0: External forced stop
bit 1: Software forced stop
bit 2: User watchdog
bit 3: Communication error
bit 4: An axis that has not been mounted exists
bit 5: During reboot preparation
bit 6: System error E5
occurrence
0402
Reserved
0403
0404
0405
0406
0407
0408
0409
040A Parameter backup times Times
Displays the times of write accesses to flash ROM by the
parameter backups after system preparation is completed.
040B
Reserved
040C
040D
040E
040F
0410
System parameter error number
No. 0001 to 000F
Bit corresponding to parameter number is turned on.
bit is No. 0001 (bit 1) to 000F (bit 15).
0411
System parameter error number
No. 0010 to 001F
Bit corresponding to parameter number is turned on.
bit is No. 0010 (bit 0) to 001F (bit 15).
0412
System parameter error number
No. 0020 to 002F
Bit corresponding to parameter number is turned on.
bit is No. 0020 (bit 0) to 002F (bit 15).
0413
System parameter error number
No. 0030 to 003F
Bit corresponding to parameter number is turned on.
bit is No. 0030 (bit 0) to 003F (bit 15).
0414
System parameter error number
No. 0040 to 004F
Bit corresponding to parameter number is turned on.
bit is No. 0040 (bit 0) to 004F (bit 15).
0415
System parameter error number
No. 0050 to 005F
Bit corresponding to parameter number is turned on.
bit is No. 0050 (bit 0) to 005F (bit 15).
0416
System parameter error number
No. 0060 to 006F
Bit corresponding to parameter number is turned on.
bit is No. 0060 (bit 0) to 006F (bit 15).
0417
System parameter error number
No. 0070 to 007F
Bit corresponding to parameter number is turned on.
bit is No. 0070 (bit 0) to 007F (bit 15).
0418
Reserved
:
047F
Note. The bit for the corresponding forced stop factor is turned on.