Filter
Top Products
SECTION 7—BACK ADJUSTMENTS
Part No 1114842 95 2G Tarsys®Powered Seating System
Installing/Removing/Adjusting Lateral Supports
Slotted Canes
Removing Lateral Supports
NOTE: For this procedure, refer to FIGURE 7.12.
1. Note the position of the existing lateral support on the back slide.
2. Loosen, but DO NOT remove, the two socket screws that secure the existing lateral
support to the back slide.
3. Slide the existing lateral support up and off the back slide.
Installing Lateral Supports
NOTE: For this procedure, refer to FIGURE 7.12.
1. If necessary, loosely install the two T-nuts and hex screws onto the new lateral
support.
2. Position the new/existing lateral support and line up the T-nuts with the slots in the
new/existing back slide.
3. Slide new/existing lateral support to the desired position.
4. Tighten the two socket screws that secure the new/existing lateral support to the back
slide securely.
FIGURE 7.12 Removing Lateral Supports - Installing Lateral Supports
Lateral Support
Back Slide
Socket Screw