Filter
Top Products
SECTION 15—WIRING AND CABLES
Part No 1114842 161 2G Tarsys®Powered Seating System
9. Use the recline function to return the wheelchair to the upright position.
FIGURE 15.5 Power Elevating Legrest, Recline Actuator and Recline Potentiometer Cables -
Tie-Wrap to Tilt Actuator
4-Way Switch, TRCM and/or TAC Cables
NOTE: For this procedure, refer to FIGURE 15.6 on page 162 and FIGURE 15.7 on page 162.
1. Make sure the wheelchair is in the upright position.
CAUTION
The wheelchair MUST be in the upright position before securing the 4-way switch,
TRCM and/or TAC cables, to prevent stretching and possibly breaking cables.
2. Bundle up the cable for the 4-way toggle switch and tie-wrap it to the TRCM or TAC
controller bracket. Refer to FIGURE 15.6.
Tilt Actuator
Tie-Wrap
Power Elevating
Legrest, Recline
Actuator, and
Recline
Potentiometer
Cables