Filter
Top Products
SECTION 9—POWER ELEVATING LEGRESTS
2G Tarsys®Powered Seating System 108 Part No 1114842
FIGURE 9.4 Adjusting the Footplate Angle
Adjusting the Calf Pad
Adjusting the Calf Pad Width
NOTE: For this procedure, refer to FIGURE 9.5.
1. Remove the two button head screws from the calf pad and calf pad bracket.
2. Reposition calf pad to calf pad bracket to desired mounting position.
3. Align button head screws to mounting holes on calf pad and calf pad bracket.
4. Install button head screws into calf pad bracket and calf pad. Securely tighten.
5. Repeat STEPS 1-4 for opposite side, if necessary.
FIGURE 9.5 Adjusting the Calf Pad Width
DETAIL “A” DETAIL “B”
Direction of
Rotation
Set Screw
Barrel Nuts
Footplate
Clamp
Footplate
Flat Head
Screws
Footplate
Footplate
Clamp
Pivot Hinge
Back View
of Legrest
Calf Pad Bracket
Calf Pad
Mounting
Holes
Button
Head
Screws
Calf Pad
Button
Head
Screws
Calf Pad Bracket
Mounting
Holes