Invacare 2GT Wheelchair User Manual


 
SECTION 9—POWER ELEVATING LEGRESTS
2G Tarsys®Powered Seating System 104 Part No 1114842
SECTION 9—POWER ELEVATING
LEGRESTS
ƽ WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may occur.
Before adjusting, repairing or servicing the seating system, ALWAYS turn the
wheelchair power OFF, otherwise, injury or damage may result.
Pinch points exist between seat and base frames. Use caution, otherwise injury may
occur.
NOTE: For complete operating information on Invacare elevating legrests, refer to the TDX
Owner's Manual, listed in Reference Documents on page 2.
Installing/Removing the Power Elevating Legrests
ƽ WARNING
To prevent personal injury, ALWAYS verify proper positioning of legs and feet prior
to use. Individual user weight may impact the rate of travel for each legrest
assembly. If simultaneous operation is desired, select a speed which allows for the
most uniform travel.
DO NOT insert fingers between legrest components. Otherwise personal injury
may occur.
CAUTION
NEVER allow items to become trapped between the legrest assemblies. Otherwise
damage to the power legrests may occur.
Ensure that all parts of both power legrests are clear of any obstructions before
raising and lowering, otherwise damage to the power legrests may occur.
NOTE: For this procedure, refer to FIGURE 9.1 on page 105.
NOTE: Power legrests are linked to the recline function of the seating system. Operating the
recline function automatically operates power legs. Power legrests can also be operated
independently of the recline function.