Filter
Top Products
SECTION 15—WIRING AND CABLES
2G Tarsys®Powered Seating System 160 Part No 1114842
ii. The remaining person should secure the recline links to the front pivot
assembly in the position noted using the two shoulder bolts and locknuts.
Torque to 23 ft-lbs ± 20%.
• Tilt Only or Tilt/Recline Systems - Use the tilt mechanism to return the seat to the
upright position.
FIGURE 15.4 Power Elevating Legrest, Recline Actuator and Recline Potentiometer Cables -
Tie-Wrap to Lower Seat Shroud
CAUTION
The wheelchair MUST be reclined backward to the maximum position before
securing the power elevating legrest, recline actuator and recline potentiometer
cables to prevent stretching and possibly breaking cables.
7. Recline back as far as possible.
8. From behind the wheelchair, tie-wrap the power elevating legrest, recline actuator
and recline potentiometer cables to the tilt actuator. Refer to FIGURE 15.5.
Left Tie-Wrap
Right Tie-Wraps
NOTE: Right
and left are
determined
from the
perspective of
an observer in
front of the
wheelchair.
Lower Seat
Shroud
Top View