Filter
Top Products
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
2G Tarsys®Powered Seating System 20 Part No 1114842
SECTION 4—SAFETY
INSPECTION/TROUBLESHOOTING
Safety Inspection Checklist
These adjustments should be made whenever this product is serviced, especially as
part of the initial unit setup. Follow these procedures:
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks
and wear, and should be replaced.
❑ Make sure all electrical connections are secure.
❑ Check that cables are routed and secured properly to ensure that cables DO NOT
become entangled and damaged during normal operation of seating system.
❑ Make sure drive lock-out works properly.
❑ Make sure tilt operates smoothly and properly.
❑ Make sure recline operates smoothly and properly.
❑ Ensure all fasteners are secure on clothing guards.
❑ Ensure arms are secure but easy to release.
❑ Ensure arm adjustment levers operate and lock securely.
❑ Ensure adjustable height arms operate and lock securely.
❑ Inspect for rips in upholstery on armrests.
❑ Ensure armrest pad sits flush against arm tube.
❑ Inspect seat and back cushions for rips or sagging.
❑ Inspect hand grips for looseness. If loose, have them replaced by a qualified
technician.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Check that all labels are present and legible. Replace if necessary.