Filter
Top Products
SECTION 6—SEAT ADJUSTMENTS
Part No 1114842 73 2G Tarsys®Powered Seating System
Adjusting/Replacing Telescoping Front Rigging
Supports
NOTE: For this procedure, refer to FIGURE 6.15.
1. Remove the two hex bolts, spacers and locknuts that secure the telescoping front
rigging support to the seat frame.
2. Perform one of the following:
• Slide existing telescoping front rigging support to one of three depth positions.
• Remove existing telescoping front rigging support and install new telescoping
front rigging support.
3. Secure telescoping front rigging at desired depth with existing two hex bolts, spacers,
and locknuts. Torque mounting screws to 75 in-lbs ± 20%.
NOTE: The two telescoping front rigging supports can be positioned at different depths depending
on the need of the user.
FIGURE 6.15 Adjusting/Replacing Telescoping Front Rigging Supports
Adjusting/Replacing Leg Support Tubes
NOTE: For this procedure, refer to FIGURE 6.16 on page 74.
NOTE: Only systems equipped with mechanical legrests require leg support tubes.
Adjusting Leg Support Tubes
1. Refer to FIGURE 6.16 and determine the corresponding mounting hole on the
adjustment slide for the desired seat depth.
2. Remove the socket bolt and locknut that secure the adjustment slide to the leg support
tube.
3. Position the adjustment slide to the mounting hole determined in STEP 1.
Hex Bolts
Seat Frame
Telescoping Front
Rigging Support
Locknuts
Spacers