Filter
Top Products
SECTION 15—WIRING AND CABLES
2G Tarsys®Powered Seating System 158 Part No 1114842
FIGURE 15.1 Securing the TAC Cables
Tilt Actuator Cable
NOTE: For this procedure, refer to FIGURE 15.2.
1. Connect the tilt actuator cable to the TRCM, SAC or TRSS connector (2-pin Anderson).
2. Bundle up the tilt actuator cable and tie-wrap it to the tilt actuator. Refer to
FIGURE 15.2.
FIGURE 15.2 Tilt Actuator Cable
Tilt Potentiometer Cable
NOTE: For this procedure, refer to FIGURE 15.3 on page 159.
1. Connect the tilt potentiometer cable to the TRCM, SAC or TRSS connector (3-pin
Molex).
2. Bundle up the tilt potentiometer cable and tie-wrap it to the rear pivot assembly. Refer
to FIGURE 15.3.
TAC Controller
Accessory Cable
(9-Pin Sub D Cable)
Tie-Wraps
Auxiliary Power
Connector/Potentiometer
Cable
Actuator
Cable
MK
5
(5-pin Connector) Cable
Tilt Actuator
Tie-Wrap