Filter
Top Products
SECTION 11—CENTER MOUNT FOOTRESTS
Part No 1114842 119 2G Tarsys®Powered Seating System
SECTION 11—CENTER MOUNT
FOOTRESTS
ƽ WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may occur.
Before adjusting, repairing or servicing the seating system, ALWAYS turn the
wheelchair power OFF, otherwise, injury or damage may result.
Pinch points exist between seat and base frames. Use caution, otherwise injury may
occur.
NOTE: For complete operating information on Invacare footrests, refer to the TDX Owner's
Manual, part number 1114809, supplied for the base of the wheelchair.
Removing/Installing the Center Mount Footrest
NOTE: For this procedure, refer to FIGURE 11.1.
Removing
1. Remove the rigging pivot pin that
secures the footrest to the mounting
bracket of the seat frame.
2. Hold the footrest with one hand and
engage the release lever with the other
while simultaneously pulling the
center mount footrest out of the
mounting bracket of the seat frame.
Installing
1. Engage the release lever with one hand,
hold the center mount footrest with the
other, and insert the center mount
footrest into the mounting bracket of
the seat frame.
2. Reinstall the rigging pivot pin to secure
the center mount footrest to the
mounting bracket of the seat frame.
FIGURE 11.1 Removing/Installing the
Center Mount Footrest
Seat Frame
Rigging Pivot
Pin
Release Lever
Center Mount
Footrest
Mounting Bracket
of Seat Frame