AMD Am188TMER Microscope & Magnifier User Manual


 
Interrupt Control Unit
8-24
8.3.10 Priority Mask Register (PRIMSK, Offset 2Ah)
(Master Mode)
The Priority Mask (PRIMSK) Register provides the value that determines the minimum
priority level at which maskable interrupts can generate an interrupt.
Figure 8-13 Priority Mask Register (PRIMSK, offset 2Ah)
The value of PRIMSK at reset is 0007h.
Bits 15–3: Reserved—Set to 0.
Bits 2–0: Priority Field Mask (PRM2–PRM0)—This field determines the minimum priority
that is required for a maskable interrupt source to generate an interrupt. Maskable interrupts
with programmable priority values that are numerically higher than this field are masked.
The possible values are zero (000b) to seven (111b).
A value of seven (111b) allows all interrupt sources that are not masked to generate
interrupts. A value of five (101b) allows only unmasked interrupt sources with a
programmable priority of zero to five (000b to 101b) to generate interrupts.
Table 8-4 Priority Field Mask (Master Mode)
Priority PR2–PR0
(High) 0 0 0 0b
10 0 1b
20 1 0b
30 1 1b
41 0 0b
51 0 1b
61 1 0b
(Low) 7 1 1 1b
15
70
000 000 000
0
0
0
PRM2
PRM1
PRM0
0