Filter
Top Products
4535 612 34161 HD3 Service Manual Page 76
CSIP Level 1 Installation: Powering On and Configuring the System
Verifying the
System Options
HD3 systems leave the factory with all available software options onboard. All purchased
options are activated, those that haven’t been purchased are not. Verify that the activated
options are those that the customer ordered. You must have the correct authorization code
(password) to activate system options in the field.
➤ To verify or activate system software options
1. Press Setup.
The Setup window opens (Figure 5-1).
2. Click the Option tab.
The Option setup window opens (Figure 5-2).
3. Option rows showing a checkmark and a Lock button, indicate that the option is active. Ver-
ify that these options correspond to those that the customer is entitled to according to the
sales order.
4. Option rows without a checkmark and having an Unlock button, are not yet activated
(option must be purchased to obtain an Unlock code from the factory). Perform the follow-
ing to activate an option:
a. Click the corresponding Unlock button and enter the option code in the Unlock Code
dialog box that opens. It is necessary to have the System Key (based on the hard drive
identifier), from the top left corner of the Option window, when requesting option
authorization codes).
CAUTION If an incorrect password is entered and okayed, the available option becomes unavailable.
b. Click OK.
c. Click Save.