Filter
Top Products
4535 612 34161 HD3 Service Manual Page 246
CSIP Level 1 Configuration: Introduction
13 Configuration
Introduction
This section lists all of the released software version part numbers for the system, identifies the
primary system PCBs, and shows where these PCBs are located in the system. When applicable,
additional PCB reference information is provided.
This section also contains configuration information such as the as-shipped system BIOS settings,
hard drive jumper positions, and the Philips-recommended settings for the optional OEM periph-
erals sold with the system.
Compatibility
Information
Contact your Philips representative for the core information you need to determine the compat-
ibility of primary system PCBs and certain hardware assemblies with respect to the system soft-
ware releases.
System
Software
Software release levels and corresponding part numbers are listed in Table 13-1. See for a sum-
marized history of the software and hardware changes associated with specific software releases.
Locating and
Identifying
Primary PCBs
The HD3 primary PCB names and locations are shown in Figure 13-1through Figure 13-4. These
figures provide linked references to the corresponding PCB illustration.
Table 13-1 System Software CD Part Numbers
Released
Software
Version
Build
No. Disk Part No. Notes
v1.00.00 .085 453561228661 System software initial release