Filter
Top Products
4535 612 34161 HD3 Service Manual Page 176
CSIP Level 2 Disassembly: Disassembly (Removal) Procedures
Figure 10-22 Removing the Power I/O Box
Panhead screws (4 plcs)
13
14
15
Transformer connections
13. Remove the four screws securing the
power I/O box to the cart frame.
14. Slide the transformer back as you
lower the power I/O box away from
the underside of the system.
15. Disconnect the two transformer
cable connections from the backside
of the power I/O box. Only discon-
nect these two cables.