Filter
Top Products
4535 612 34161 HD3 Service Manual Page 158
CSIP Level 2 Disassembly: Disassembly (Removal) Procedures
Figure 10-4 Removing the Right Side Enclosure
screws (2
plcs)
4
5
4. Remove the two screws securing the
right side enclosure. Removing this
enclosure allows access to the E-box
and power supply assemblies.
5. Pivot the back side of the enclosure
away from the system, and then gen-
tly slide the enclosure toward the
rear to remove it. Proceed to step 6.