4535 612 34161 HD3 Service Manual Page 39
CSIP Level 1 General Information: Device Safety Requirements and Regulatory Compliance
I/O Panel
The I/O Panel, which provides connections for external devices, is installed into the rear of the
cart framing (see Figure 11-5 for connection descriptions).
Cables
Physical cables provide system signal interconnect and power distribution. Refer to Section 11,
“Cabling”, for detailed cable information.
Device Safety
Requirements
and
Regulatory
Compliance
The HD3 Ultrasound System complies with the following requirements for the International
Electrotechnical Commission (IEC), the Canadian Standard Association (CSA), and the Under-
writers Laboratories (UL).
• IEC60950/EN60950 for data processing equipment
• IEC 60601-1/EN 60601-1for medical equipment
• IEC 60601-1-1/EN 60601-1-1 for medical equipment
• CSA22.2 No. 601.1
• UL 2601-1
For information about applicable safety standards and specifications, see the HD3 Getting Started
manual shipped with the system.