Filter
Top Products
4535 612 34161 HD3 Service Manual Page 185
CSIP Level 2 Disassembly: Disassembly (Removal) Procedures
Figure 10-31 Removing the Transducer Connector
Assembly (TCA)
Panhead screws
(10 plcs)
14
15
14. Remove the ten screws securing the
transducer connector assembly to
the E-box and cart chassis.
15. Gently pull the transducer connector
assembly off the front of the E-box
assembly.
NOTE To reinstall the transducer con-
nector assembly, the E-box
rear shield must first be
installed to prevent the E-box
boards from moving out of
position. Refer to step 2 for
reinstalling the E-box rear
shield.