Filter
Top Products
4535 612 34161 HD3 Service Manual Page 124
CSIP Level 1 Performance Tests: Introduction
6Performance Tests
Introduction
This section calls for examinations that determine functional confidence and ensure that the sys-
tem is operating as intended at initial installation and after upgrades or repairs.
The goal here is to verify system functionality. If system testing reveals any problems, trouble-
shoot, repair, and retest the system before presenting it to the customer for use.
Warnings and
Cautions
Review Section 3, “Safety” before continuing. Also follow any additional warnings and cautions
contained in this section.
Visual
Inspection for
Mechanical
Integrity
At initial installation and after upgrades or repairs, inspect the systemcart, controls, cables,
power cord, connectors, and transducers for outward signs of wear or physical damage that
would suggest the system may not be able to function correctly and safely:
• Check the system for abnormalities or conditions that do not meet as-manufactured specifi-
cations.
• Ensure mechanical moving parts are functional and operate correctly:
- Caster wheels all roll smoothly, both front wheel brakes lock.
- User Interface Control Panel up/down movement can be actuated via the front handle
latch mechanism. Movement in both directions is smooth.
- The moveable controls operate smoothly.
- Video Monitor can be tilted up or down and with the neck assembly can be rotated left
and right or up/down while being able to hold position without sagging when the desired
adjustment is completed.