Filter
Top Products
4535 612 34161 HD3 Service Manual Page 181
CSIP Level 2 Disassembly: Disassembly (Removal) Procedures
Figure 10-27 Removing the Power Supply
6
Slot
5
5. Disengage the power supply by plac-
ing a slotted screwdriver into the
slot at the rear side of the E-box
case. Gently pry the screwdriver
toward the front of the system until
you feel the power supply release. It
does not take much pressure to do
this.
6. Slide and remove the power supply
out from the rear of the E-box.
7. Either proceed to step 8, or to
remove the E-box assembly, cooling
fans or Backplane board proceed to
step 11.