Filter
Top Products
4535 612 34161 HD3 Service Manual Page 157
CSIP Level 2 Disassembly: Disassembly (Removal) Procedures
System Enclosures
Figure 10-3 Removing the Left Side Enclosure
screws (2
plcs)
2
3
1
NOTE The two side enclosures must
be removed before removing
the front enclosure or top
cover.
➤ To remove the system enclo-
sures
1. Properly power off the system and
then disconnect the system power
cord from the main AC supply.
2. Remove the two screws securing the
left side enclosure. Removing this
enclosure allows access to the
B/W printer, hard drive, CD drive,
and transformer.
3. Pivot the back side of the enclosure
away from the system and then gen-
tly slide the enclosure toward the
rear to remove it. Proceed to step 4.