Filter
Top Products
4535 612 34161 HD3 Service Manual Page 271
CSIP Level 1 Configuration: Peripheral Settings
VCR
The VCR has front/rear panel switches, displayed menu settings, and hidden menu settings. Mit-
subishi HS-MD3000U/E VCR settings for use with the HD3 are given in Table 13-4, Table 13-5,
and Table 13-6.
NOTE All switches and internal menus settings should be set properly at the factory on VCRs
shipped with new systems. However, when a replacement VCR is ordered, you will
need to check the switch settings and menu settings
The displayed menu settings are listed in Table 13-5. To verify or reset these settings, see “To
change the VCR displayed menu settings” on page 275. Enter the numerical code from
Table 13-5 to enter the settings listed. (Only the numerical code that corresponds to setting is
displayed. You will not see the setting titles.)
The hidden menu settings are listed in Table 13-6. To verify or reset these settings, see “To
change the VCR hidden menu settings” on page 276.