Filter
Top Products
4535 612 34161 HD3 Service Manual Page 167
CSIP Level 2 Disassembly: Disassembly (Removal) Procedures
Figure 10-13 Removing the Splitter Board
12
Cable connections
13
13
14
11. Refer to Video Monitor for video
monitor removal before proceeding
with the following procedure.
12. Disconnect the four cable connec-
tions from the control panel splitter
board.
13. Remove the two screws securing the
two ground wires and the splitter
board.
14. Remove the two remaining screws
securing the splitter board to the
control panel housing.
Return to Disassembly Procedure List (1
of 2).