Filter
Top Products
4.5.1 Configure Density Measurement Unit
ProLink II ProLink > Configuration > Density > Density Units
ProLink III Device Tools > Configuration > Process Measurement > Density
Field Communicator Configure > Manual Setup > Measurements > Density > Density Unit
Overview
Density Measurement Unit specifies the units of measure that will be displayed for density
measurement.
Procedure
Set Density Measurement Unit to the option you want to use.
The default setting for Density Measurement Unit is g/cm3 (grams per cubic centimeter).
Options for Density Measurement Unit
The transmitter provides a standard set of measurement units for Density Measurement Unit.
Different communications tools may use different labels.
Options for Density Measurement UnitTable 4-10:
Unit description Label
ProLink II ProLink III Field Communicator
Specific gravity unit (not temperature-
corrected)
SGU SGU SGU
Grams per cubic centimeter
g/cm3 g/cm3 g/Cucm
Grams per liter
g/l g/l g/L
Grams per milliliter
g/ml g/ml g/mL
Kilograms per liter
kg/l kg/l kg/L
Kilograms per cubic meter
kg/m3 kg/m3 kg/Cum
Pounds per U.S. gallon
lbs/Usgal lbs/Usgal lb/gal
Pounds per cubic foot
lbs/ft3 lbs/ft3 lb/Cuft
Pounds per cubic inch
lbs/in3 lbs/in3 lb/CuIn
API gravity
degAPI degAPI degAPI
Short ton per cubic yard
sT/yd3 sT/yd3 STon/Cuyd
Configure process measurement
Configuration and Use Manual 45